Diamond wheel plating process
Products Application Guidance
Electroless Plating process keeping the corrosion/abrasion resistance tightly and being deposited diamond powder on the cutting wheel. In case of small size cutting wheel, pre-coating on powder by electroless plating and then adhering them to the wheel by resin methods are adopted..
Person-in-charge
Mr. S.H. Roh, GM / 010-7748-0994 / 19hero77@naver.com
| No. | Process | Explanation | Chemicals |
| 1 | Material Degreasing and drying | ||
| 2 | Plating resist coating | High temperature, chemical resistant products | |
| 3 | Degreasing | MS Top Clean | |
| 4 | Rinsing | ||
| 5 | Etching | MS A-111 | |
| 6 | Rinsing | ||
| 7 | Nickel Strike | Wood or Modified type | |
| 8 | Rinsing | ||
| 9 | First Undercoat | Sulfamic acid or Watt bath | |
| 10 | Second Vacuum plating | Depending on particle size, dispersed / gravity type | |
| 11 | Rinsing | ||
| 12 | Surface adjustment | MS 250M | |
| 13 | Rinsing | ||
| 14 | Electroless plating | Top Coating | MS 611 |
| Top Coating / Tungsten alloy | MS ENW | ||
| 15 | Rinsing | ||
| 16 | Dry |